Flexor tendon healing within the tendon sheath using bioabsorbable poly-L/D-lactide 96/4 suture. A histological in vivo study with rabbits.

The bioabsorbable poly-L/D-lactide (PLDLA) 96/4 suture has good biomechanical and knot properties, and sufficient tensile strength half-life for flexor tendon repair. In the present study, the biocompatibility of PLDLA suture was compared with that of coated braided polyester suture in the rabbit flexor digitorum profundus tendon repaired within the tendon sheath. Postoperative unrestricted active mobilization was allowed. The tendons were studied histologically after 1-, 3-, 6-, 12-, 26-, and 52-week follow-ups. No differences were found in the biocompatibility between the suture materials, with only scattered multinuclear giant cells near the sutures in both groups from 6 weeks onwards. At 52 weeks, most of the PLDLA material was absorbed and the histological structure of the tendon appeared normal, whereas in the polyester repairs the suture knots filled the repair site, causing bulking of the tendon surface, and the collagen alignment appeared disoriented. The results suggest that the PLDLA 96/4 is a suitable suture material for flexor tendon repair.

Bioabsorbable poly-L/D-lactide (PLDLA) 96/4 triple-stranded bound suture in the modified Kessler repair: an ex vivo static and cyclic tensile testing study in a porcine extensor tendon model.

Previously the biomechanical properties of the bioabsorbable poly-L: /D: -lactide (PLDLA) 96/4 suture were found suitable for flexor tendon repair. In this study, three PLDLA suture strands were bound together parallel to each other side-by-side to form a triple-stranded bound suture and the modified Kessler tendon repair was performed. The biomechanical properties of the PLDLA repair in porcine extensor tendons ex vivo were investigated with static and cyclic tensile testing. In both biomechanical tests, the strength of the PLDLA repair achieved the estimated forces needed to withstand active mobilization.

Fixation of experimental osteotomies with bioabsorbable SR-polylactide-polyglycolide (80/20) polymeric rods.

Self-reinforced polylactide-polyglycolide (80/20) composite rods, 2 mm in diameter and 36 mm in length, were implanted into the dorsal subcutaneous tissue of 20 rabbits. Osteotomies of the distal femur were fixed with these rods (2x15 mm) in the rabbits. The follow-up times varied from 3 to 104 weeks. After sacrifice, three-point bending and shear tests and molecular weight measurements were performed for subcutaneously placed rods. Radiological, histological, microradiographic, oxytetracycline-fluorescence, and histomorphometrical studies of the osteotomized and intact control femora were performed. After 6 weeks the mechanical properties had decreased significantly, but osteotomies had healed uneventfully. The present investigation showed that the mechanical strength and fixation properties of SR-Polylactide-glycolide (80/20) rods are suitable for fixation of cancellous bone osteotomies in rabbits provided that the operative technique is correct. The present article is the first report on the application of these rods for fixation of cancellous bone osteotomies.

Enveloping bioabsorbable polyglycolide membrane and immobilization in Achilles tendon repair: A comparative experimental study on rabbits.

Using qualitative and histoquantitative methods, we investigated the effect of immobilization versus nonimmobilization on the biodegradation process, implant-tissue interaction, and scar formation after enveloping a rejoined rabbit Achilles tendon with a self-reinforced polyglycolide (SR-PGA) membrane. The soleus and gastrocnemius tendons of the right hind legs of 40 rabbits were transected. After suturing the ends, the seam was enveloped with the bioabsorbable membrane. Twenty ankles were immobilized with cast, 20 remained nonimmobilized. All nonoperated left ankles served as intact controls. During the follow-up of 3, 6, 12, and 24 weeks, scar formation, tissue response, and membrane biodegradation were studied histologically and histomorphometrically. The amount of scar tissue, highest at 3 weeks, gradually approached intact controls. SR-PGA degradation in both cast and noncast specimens was near complete by 24 weeks. Signs of an inflammatory process were most prominent at 3 weeks and diminished gradually by 24 weeks. No significant difference between cast and noncast specimens was noted at any time point regarding the amount of scar tissue, degradation process of PGA, or intensity of inflammatory reaction. In the present experimental setting, cast immobilization influenced neither scar formation nor speed of degradation during reunion of transected Achilles tendon ends as compared with nonimmobilization. No differences in the reunion process of the tendon ends were seen between the immobilized and nonimmobilized groups. Moreover, inflammatory cells were similar in both groups and reflected a transient tissue reaction to the membrane. Within the follow-up, the seam area (cross-sectional) approached that of intact controls.

The strength of the 6-strand modified Kessler repair performed with triple-stranded or triple-stranded bound suture in a porcine extensor tendon model: an ex vivo study.

PURPOSE: To investigate the biomechanic influence of triple-stranded sutures and the spatial arrangement of the strands on the strength of the 6-strand Pennington modified Kessler repair. METHODS: In the present ex vivo study of pig extensor tendons 2 techniques were used: (1) triple-stranded suture (3 suture strands in the same needle) and (2) triple-stranded bound suture (3 suture strands in the same needle that were bound together, parallel to each other, side by side). The repairs were subjected to static tensile testing. RESULTS: The 6-strand modified Kessler repair performed with triple-stranded bound suture reached significantly higher yield force, ultimate force, and both partial and total 1-, 2-, and 3-mm gap forces compared with the repairs performed with triple-stranded suture. The stiffness and strain values at the yield point and at the ultimate point did not differ significantly. CONCLUSIONS: This experimental study introduces a way to improve the strength of the tendon repair. The triple-stranded bound suture significantly increased both the gap resistance and ultimate force of the 6-strand modified Kessler repair. We assume the improvements are due to increased holding capacity of the locking loops. The triple-stranded bound suture is easy to use and avoids several problems associated with traditional multistrand repairs. Further studies are needed before clinical use can be considered.

The effect of low-intensity pulsed ultrasound on bone healing in SR-PLLA rod fixed experimental distal femur osteotomy in rat.

The effects of low-intensity pulsed ultrasound (30 mW/cm2) were investigated in experimental cancellous bone fracture healing in bioabsorbable self-reinforced poly-L-lactide (SR-PLLA) rod fixed distal femur osteotomy in rats. A transverse transcondylar osteotomy was fixed with one SR-PLLA rod in 32 male Wistar rats of the age of 20 weeks. Half of the rats had a daily 20-min ultrasound exposure for three weeks. The follow-up times were three, six, and 12 weeks. Radiographical, histological, microradiographical, oxytetracycline labeling, and histomorphometrical analyses were performed. No foreign-body reactions were noted. The biocompatibility of SR-PLLA and ultrasound was found to be good. In the radiological and histological assessments there was a slight tendency for enhanced healing in the ultrasound group at three weeks, but at six and 12 weeks no differences were observed. The histomorphometrical and oxytetracycline labeling analyses showed that ultrasound exposure had no significant effects on bone healing. The present study shows that there were no obvious findings to support the hypothesis that low-intensity pulsed ultrasound enhances bone healing in self-reinforced poly-L-lactide (SR-PLLA) rod fixed experimental metaphyseal distal femur osteotomy in rats. The observed good biocompatibility provides a safe starting-point for clinical trials on bioabsorbable fixation combined with low-intensity ultrasound.

Bioabsorbable screw fixation for the treatment of ankle fractures.

BACKGROUND: Self-reinforced poly(L/dL)lactide 70:30 (SR-PLA70) retains its strength in bone for 24 weeks, whereas self-reinforced poly-L-lactide (SR-PLLA) retains its strength for over 36 weeks. In this prospective randomized study, bioabsorbable 4.5-mm SR-PLA70 screws were compared with SR-PLLA screws in the treatment of displaced ankle fractures in adults. METHODS: Sixty-two patients with ankle fractures needing operative treatment were randomized into two groups. Comminuted fractures needing plating were excluded. In total 54 of 62 patients were followed up for 1 year by clinical evaluation, radiographs, and Olerud-Molander score. RESULTS: The study groups differed significantly only in the mean duration of sick leave (SR-PLA70, 60 days; SR-PLLA, 65 days; P = 0.02). At the 1-year follow-up, syndesmotic ossification was more common in the SR-PLA70 group (5 versus 1 patient, not significant). Radiologically, the screw channel had not disappeared in any of the patients by the 1-year follow-up. CONCLUSIONS: Both implant types proved to have good biocompatibility. SR-PLA70 and SR-PLLA screws are suitable in selected cases for the fixation of ankle fractures, but the mechanical stability of the fixation has to be carefully monitored perioperatively.

The impact of polyglycolide membrane on a tendon after surgical rejoining. A histological and histomorphometric analysis in rabbits.

Tissue response to self-reinforced polyglycolide (SR-PGA) membranes surrounding rejoined rabbit tendons was compared with tissue response to nonenveloped rejoined tendons, with special focus on scar formation and SR-PGA membrane biodegradation process. Both hind legs of 20 skeletally mature rabbits were operated on by transecting the plantaris longus tendons and rejoining the ends with sutures. The right side seams were enveloped with bioabsorbable SR-PGA membranes, while the left sides served as noncovered controls. The follow-up times were 3, 6, 12, and 24 weeks. Scar formation and tissue response to membranes were studied by histological and histomorphometric analysis. Tendon regeneration was most active at 3 weeks. Capillary formation was more prominent in specimens with shorter follow-up times. Membrane degradation induced an inflammatory reaction observed at all follow-up time points. Under polarizing microscopy, birefringent SR-PGA material was seen to vanish almost completely by 24 weeks. SR-PGA membranes had no specific effect on scar formation and there were no differences in the reunion process of the transected tendon ends between the SR-PGA membrane groups and the controls. Inflammatory cells in the SR-PGA membrane groups reflected a tissue reaction to the membrane. When placed in soft tissues, SR-PGA membranes degraded almost completely within 24 weeks.

Effect of ultrasound therapy on bone healing of lateral malleolar fractures of the ankle joint fixed with bioabsorbable screws.

BACKGROUND: We investigated the effect of low-intensity ultrasound on bone healing in bioabsorbable self-reinforced poly-L: -lactic acid (SR-PLLA) screw-fixed lateral malleolar fractures. The study design was prospective, randomized, double-blind, and placebo-controlled. METHODS: A total of 22 fractures were fixed with one SR-PLLA screw. All the patients were instructed to use an ultrasound device 20 min daily for 42 days without knowing whether it was active or inactive. Eleven patients had active and eleven sham ultrasound devices. The causes of error during treatment with head module placement and attachment to the convex surface of the lateral distal fibula were minimized by careful targeting and using coupling gel. Radiological fracture healing was assessed by radiographs and multidetector computed tomography (CT) scans in a blinded manner by a radiologist and orthopedic surgeons. RESULTS: The overall compliance to the daily ultrasound treatments was good. All wounds healed uneventfully, and no foreign body reactions were observed. No difference was observed between the groups regarding either fracture line visualization or callus formation assessed by plain radiographs. In the CT images at 9 weeks, the share of the endosteal united fracture line compared to the non-united fracture line was slightly higher in the active ultrasound device group than in the sham ultrasound device group, but the difference was not statistically significant. CONCLUSION: The study indicates that the biocompatibility of ultrasound therapy and bioabsorbable SR-PLLA screw fixation is good. There was no obvious effect of low-intensity ultrasound on lateral malleolar fracture healing. However, the relatively small number of patients must be kept in mind when interpreting our results. It is also important to limit any conclusions based on the present study to malleolar fractures fixed with the SR-PLLA screw.

Fixation of distal femoral osteotomies with self-reinforced poly(L/DL)lactide 70:30 and self-reinforced poly(L/DL)lactide 70: 30/bioactive glass composite rods. an experimental study on rabbits.

Two self-reinforced poly(L/DL)lactide 70:30 or self-reinforced poly (L/DL)lactide 70:30/ bioactive glass (SR-P(L/DL)LA/bioactive glass) composite rods (2 mm x 40 mm) were implanted into the dorsal subcutaneous tissue and osteotomies of the distal femur were fixed with these rods (2 mm x 26 mm) in 36 rabbits. The follow-up times varied from 3 to 100 weeks. After the animals were killed, three-point bending and shear tests and molecular weight measurements were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic and oxytetracycline-fluorescence studies of the osteotomized and intact control femora were performed. After 12 weeks the SR-P(L/DL)LA rods had fragmented into pieces and the mechanical properties could not be measured. The SR-P(L/DL)LA/bioactive glass rods lost their mechanical properties slower, and at 24 weeks the bending strength had decreased by 39% and the shear strength by 50%. After that the mechanical properties of the SR-P(L/DL)LA/bioactive glass rods could not be measured. All osteotomies healed well, and no gross signs of inflammatory reactions were observed. One slight displacement was seen in the three-week follow-up group with SR-P(L/DL)LA rods. Signs of resorption of the implants were seen after 48 weeks in the SR-P(L/DL)LA group and after 24 weeks in the SR-P(L/DL)LA/bioactive glass group. The SR-P(L/DL)LA/bioactive glass rods were almost totally resorbed from the bone at 100 weeks. The present investigation showed that the mechanical strength and fixation properties of the SR-P(L/DL)LA and the SR-P(L/DL)LA/bioactive glass composite rods are suitable for fixation of cancellous bone osteotomies in rabbits.

The effect of low intensity ultrasound and bioabsorbable self-reinforced poly-L-lactide screw fixation on bone in lateral malleolar fractures.

INTRODUCTION: There are no previous reports of low intensity pulsed ultrasound therapy in connection with bioabsorbable fracture fixation. In this randomised, prospective, double-blind and placebo-controlled study, the effects of ultrasound on bone mineral density and bone healing were examined in lateral malleolar fractures fixed with a bioabsorbable self-reinforced poly-L-lactide screw (SR-PLLA). MATERIALS AND METHODS: Thirty adult patients with SR-PLLA screw-fixed lateral malleolar fracture underwent ultrasound therapy 20 min daily for 6 weeks. Half of the patients were provided randomly with a sham ultrasound device. Bone mineral density and bone healing were assessed by dual-energy X-ray absorptiometry (DXA) and by radiographs. RESULTS: Bone mineral density of the fractured lateral malleolus tended to increase slightly during 12 weeks of follow-up. The increase was symmetrical and statistically non-significant between the ultrasound and non-ultrasound group. All the fractures healed uneventfully. The biocompatibility of the bioabsorbable SR-PLLA fixation device and low intensity pulsed ultrasound was good. Despite the slight tendency for more frequent callus formation in the ultrasound group, no statistically significant effect of low intensity pulsed ultrasound on lateral malleolar fracture healing could be observed. CONCLUSION: It was not possible to observe any statistically significant effect of low intensity pulsed ultrasound on lateral malleolar fracture healing in this study. Further studies are needed to examine the role of ultrasound therapy in the healing of fractures treated with bioabsorbable fixation devices.

Fixation of distal femoral osteotomies with self-reinforced polymer/bioactive glass rods: an experimental study on rabbits.

Two self-reinforced poly(desamino tyrosyl-tyrosine ethyl ester carbonate), poly(DTE carbonate) or self-reinforced poly(DTE carbonate)/bioactive glass rods, (2 mm by 40 mm) were implanted into the dorsal subcutaneous tissue and osteotomies of the distal femur were fixed with these rods (2 mm by 26 mm) in 36 rabbits. The follow-up times varied from three to 100 weeks. After sacrifice, three-point bending and shear tests and molecular weight measurements were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of the osteotomized and intact control femora were performed. The initial mechanical properties were higher with the SR-poly(DTE carbonate) rods, but the SR-poly(DTE carbonate)/bioactive glass rods lost their mechanical properties slower. At 100 weeks the bending strength had decreased to 21% of the initial value with the SR-poly(DTE carbonate) rods and to 49% with the SR-poly(DTE carbonate)/bioactive glass rods. The shear strength had decreased to 10% with the SR-poly(DTE carbonate) rods and to 23% of the initial value with the SR-poly(DTE carbonate)/bioactive glass rods. Two slight displacements and one delayed union and one failure of fixation were seen in the SR-poly(DTE carbonate) group. In the SR-poly(DTE carbonate)/bioactive glass group five delayed unions and seven slight displacements were seen. No signs of osteolysis or foreign body reactions were observed. Signs of resorption of the implants were seen at 100 weeks in the SR-poly(DTE carbonate)/bioactive glass group. The present investigation showed that the mechanical strength and fixation properties of SR-poly(DTE carbonate) and SR-poly(DTE carbonate)/bioactive glass rods are suitable for fixation of cancellous bone osteotomies in rabbits.

In vitro and in vivo behavior of self-reinforced bioabsorbable polymer and self-reinforced bioabsorbable polymer/bioactive glass composites.

The aim of this study was to investigate the in vitro and in vivo properties and degradation of (1) self-reinforced (SR) lactide copolymer, P(L/DL)LA 70:30, and (2) SR composites of the same polylactide and bioactive glass 13-93. The following three polymer and polymer-bioactive glass samples were studied: SR-PLA70, SR-PLA70 + BaG15s, and SR-PLA70 + BaG20c. In vitro behavior was studied in a phosphate-buffered saline for 87 weeks at 37 degrees +/- 1 degrees C and a pH of 7.4 +/- 0.2. In vivo behavior was studied by implanting the rods in the dorsal subcutaneous tissue of rats (SR-PLA70 + BaG20c) or rabbits (SR-PLA70 and SR-PLA70 + BaG15s) for 48 weeks. The degradation of the specimens was evaluated by measuring the changes in mechanical properties, crystallinity and molecular weight of polymer, water absorption, weight loss, and structural changes. Results showed that the addition of bioactive glass filler modified the degradation kinetics and material morphology.

Use of hydroxylapatite/ polymer-composite in facial bone augmentation. An experimental study.

On purpose to achieve better and more controlled alveolar ridge augmentation, biodegradable polyglycolide (PGA) curved implants with porous, particulate hydroxylapatite (HA) were developed to be used in an experimental augmentation in sheep mandible. Prior to surgery curved PGA implants were loaded with particulate HA with help of a rather fast degrading adhesive, polyglycolide/polylactide (PGA/PLA) copolymer. This augmentation device was inserted into the ridge using a slight modification of the tunnelling technique. Macroscopically, a dehiscence with loss of HA particles was observed in 3 of the 16 augmentations. Bone ingrowth was seen in a noticeable degree in one sheep at 24 weeks. Instead, foreign body-type cells were shown at the interface of mandibular bone and hydroxylapatite deposit, as well as abundant connective tissue reaction inside HA deposits. The results of the study give rise to concern about bony integration in the presence of biodegradable polyglycolide substances in HA augmentation. The findings call in question even their use as a carrier for bone forming agents in combination with HA.

Fixation of distal femoral osteotomies with self-reinforced poly(desamino tyrosyl-tyrosine ethyl ester carbonate) rods: an experimental study on rats.

Self-reinforced poly(desamino tyrosyl-tyrosine ethyl ester carbonate) poly(DTE carbonate) rods (diameter, 2 mm; length, 26 mm) were implanted into the dorsal subcutaneous tissue of 16 rats. Osteotomies of the distal femur were fixed with these rods (2 mm by 15 mm) in 64 other rats. The follow-up times varied from 1 week to 1 year. After sacrifice, three-point bending and shear tests and molecular weight measurements were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of the osteotomized and intact control femurs were performed. At 36 weeks, the bending strength of the rods was nearly at the same level as the initial value, and the shear strength was decreased to about one quarter of the initial value. One of the 64 evaluated osteotomies showed signs of infection at 24 weeks, and there were five failures of fixation. Fifty-eight osteotomies healed uneventfully. No gross signs of inflammatory or foreign-body reactions were observed. The present investigation showed that the mechanical strength and fixation properties of SR-poly(DTE carbonate) rods are suitable for fixation of cancellous bone osteotomies in rats. The present article is the first report on successful application of SR-poly(DTE carbonate) rods for fixation of cancellous bone osteotomies.

The effect of transforming growth factor-beta1, released from a bioabsorbable self-reinforced polylactide pin, on a bone defect.

Transforming growth factor-beta 1 (TGF-beta1)is a polypeptide growth factor which has been shown to increase bone formation in experimental studies. In this study it was combined to a bioabsorbable self-reinforced poly-LD-lactic acid fracture fixation pin. To assess the effect of TGF-beta1 on the healing of a bone defect, the pins were implanted in the rat distal femur next to a bone defect filled with a viscose cellulose sponge. The pins used in the study group (13 rats) contained 50 microg of TGF-beta1, whereas in the control group of nine rats an identical pin without the growth factor was used. In the histologic examination at 1, 3 and 6 weeks no difference was detected in the amount of bone inside the viscose cellulose sponge between the rats treated with TGF-beta1 and those with no added growth factor. At 3 weeks there was more fibroblast-rich mesenchymal tissue inside the viscose cellulose sponge in the rats treated with TGF-beta1. In the radiographic examination at 3 weeks there was an increase in the amount of new periosteal bone on the bone defect in the TGF-beta1-treated rats.

Healing of subcapital femoral osteotomies fixed with self-reinforced poly-L-lactide screws: an experimental long-term study in sheep.

Subcapital femoral osteotomies of ten young adult sheep were fixed with two bioabsorbable, self-reinforced, poly- L-lactide (SR-PLLA) lag screws of 4.5 mm in diameter. At 3 weeks radiographs were taken to check the reduction and fixation achieved. After follow-up periods of 12 weeks, 1 year and 3 years with three sheep in each group, and of 7 years and 4 months with one sheep, the sheep were killed, and the healing of the osteotomies, degradation and tissue response of the implants were examined radiographically, histologically and microradiographically. All osteotomies healed with a firm bony union. There was no dislocation or wound infection. Histologically, there was no marked tissue response in the bone tissue. At 12 weeks the implants were grossly intact, at 1 year granulation tissue and new bone formation had started to penetrate into the implant, and at 3 years the implant area was mostly replaced by connective tissue and new bone, but implant material was still seen as little islands surrounded by some lymphocytes. At 7 years and 4 months, the implant material had been degraded and replaced by tight bone. Self-reinforced poly- L-lactide lag screws seem to possess adequate mechanical properties and good biocompatibility for this demanding fixation.

The effects of low-intensity pulsed ultrasound on bioabsorbable self-reinforced poly L-lactide screws.

The effects of low-intensity pulsed ultrasound on the mechanical and molecular properties of self-reinforced poly L-lactide (SR-PLLA) screws were studied in vitro. SR-PLLA screws of 4.5 mm diameter were exposed on low-intensity ultrasound for 1, 3. 6, 9, and 12 weeks. After exposure, the bending strength, shear strength, and molecular weight were investigated. There were no differences in the investigated properties between the ultrasound exposure and control groups. We found no evidence that low-intensity ultrasound has any effect on the mechanical or molecular properties of SR-PLLA screws in vitro. The present results suggest that biodegradable SR-PLLA fixation devices are compatible with low-intensity ultrasound in vitro.

Shear-load carrying capacities of the distal rat femora after osteotomy fixed with self-reinforced polyglycolic acid and poly-L-lactic acid pins.

Distal femora of 40 rats were osteotomized and fixed with self-reinforced polyglycolide (SR-PGA) and self-reinforced polylactide (SR-PLLA) pin 2.0 mm in diameter and 15 mm in length. The shear-load carrying capacities of the osteotomized bones were compared with each other and with the intact control rat distal femora of the same age of 20 pairs. The follow-up times were 1, 3, 6, 12, 24, 36, 48, and 52 weeks. After killing all operated and control femora were examined macroscopically and radiographically. The shear-load carrying capacities reached their highest values at 24 weeks in the SR-PGA-fixed specimens, after that decreasing to the level where they remained. In the SR-PLLA-fixed specimens the strength values of the pins increased after three weeks, but there was a decrease at 24 weeks. After that the shear-load carrying capacities started to raise because of the influence of the healed osteotomy. In the control bones the shear-load carrying capacities were weaker than in the SR-PGA-and SR-PLLA-fixed specimens except at three weeks, as the osteotomies had not yet healed. During the whole follow-up period the mean shear-load carrying capacity of the SR-PGA-fixed specimens was 199.1 N, in the SR-PLLA-fixed specimens 214.6 N, the corresponding value of the control specimens being 148.2 N.

Strength retention of drawn self-reinforced polyglycolide rods and fixation properties of the distal femoral osteotomies with these rods. An experimental study on rats.

Drawn self-reinforced polyglycolide (SR-PGA) rods, Ø 2 mm and 26 mm long, were implanted in the dorsal subcutaneus tissue of 16 rats. Osteotomies of the distal femur were fixed with SR-PGA rods (2 mm by 15 mm) in another 38 rats. The follow-up times varied from one week to one year. After sacrifice, three-point bending and shear tests were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of osteotomized and intact control femora were also performed. At three weeks the flexural strength of the rods was 50% of the initial value, and the flexural modulus was 46% of the initial value. Five osteotomy specimens had to be excluded due to dislocation or non-union. One of the 33 evaluated osteotomy specimens showed signs of postoperative infection. Thirty-two osteotomies healed uneventfully. No gross signs of inflammatory or foreign-body reaction were observed. The amount of osteoid surface and active osteoid formation surface reached their highest value in the histomorphometrical analysis at 24 weeks. The present investigation demonstrated that the mechanical strength and fixation properties of the drawn SR-PGA rods are suitable for fixation of cancellous bone osteotomies in rats. The present article is the first report on the successful application of drawn SR-PGA rods for fixation of cancellous bone osteotomies.